Coin Shaped Lithium Metal

Pre-cut Lithium chips widely used for coin cell construction in Li battery R&D. This saves the Li punching operation and provide homogeneous pre-cut chips. Standard packaging is in 100g aluminium tins, which are in turn packaged in an Aluminium laminate foil. Both are packaged on a dry room environment.

SPECIFICATIONS: 

• Available in various sizes in thicknesses of 0.25mm and 0.45mm and diameter: 16mm (custom variations pls ask)
• Purity: 99.9%
• Melting point: 180.5 degrees C
• Density: 0.534g/cm3
• Colour: Silver
• Net Weight: Approximately 100g
• Use: Clean the surface of the lithium foil using a nylon brush/stainless steel scalpel until a shiny silvery surface appears (inside an argon glovebox)

 Please note the number of chips is relatively large:

over 3000 pcs @ 0.25mm

over 1750 pcs @ 0.45mm

Shipping Limitations: Shipping of Lithium foil are described as "UN 1415, Lithium, 4.3, PGI." All shipments are Hazard Class 4.3 and require "Dangerous when wet" labels. Sea Class 4.3 (IMDG.) Road, Rail class 4.3 11a (RID/ADR.) Please note extra shipping charges may apply and shipping is limited by location.